How to Remove Aaron's Thinking Putty from Walls
Got Aaron's Thinking Putty stuck on your walls? You're not alone. This versatile, moldable material may be fun to play with, but it can become a nightmare to remove from surfaces it wasn't meant to be on. Fear not, for help is here. We've compiled a step-by-step guide to help you effectively remove Aaron's Thinking Putty from your walls while keeping your paint and surfaces intact.
Before you begin, it's crucial to gather the right tools. You'll need a razor blade, a hairdryer, some rubbing alcohol, a cotton swab or soft cloth, and a putty knife. Now, let's dive into the process.
Preparation and Softening
The first step is to prepare the putty and the surface. Heating the putty makes it softer and easier to remove. Use your hairdryer on the lowest heat setting and gently warm the affected area.
While the putty is warming, grab your razor blade and putty knife. You'll use these to gently scrape off the excess putty once it's softened.
Scraping and Peeling
Start by using the putty knife to carefully scrape off as much of the softened putty as possible. Be gentle to avoid removing any paint or damaging the surface.
Once you've removed as much as you can with the putty knife, switch to the razor blade. Hold it at a 45-degree angle to the surface and carefully scrape off the remaining putty. Be extremely cautious to avoid scratching or cutting the wall.
Targeting Sticky Residue
After scraping, you might still see sticky residue on the wall. Don't worry, this is normal and can be easily removed.
Moisten a cotton swab or soft cloth with rubbing alcohol and gently rub the affected area. The alcohol will dissolve the residue, leaving your wall clean. Ensure you don't leave the rubbing alcohol on the wall for too long to prevent it from damaging the paint.
Deep Cleaning and Sanitizing
Once all the putty is removed, it's essential to clean the area to ensure no residue remains. Wipe the area with a damp cloth to remove any remaining alcohol and soap residue.
After cleaning, you might want to sanitize the area, especially if the putty was left on the wall for an extended period. A solution of water and mild dish soap should do the trick. Simply spray the solution onto the wall, let it sit for a few minutes, then wipe it off with a clean, damp cloth.
Drying and Inspection
Once you've finished cleaning and sanitizing, allow the wall to dry completely. This could take a few hours or even overnight, depending on the humidity levels in your home.
After the wall is dry, inspect the area for any remaining residue or marks. If you find any, repeat the cleaning and scraping process until the wall is entirely clean.
Congratulations! You've successfully removed Aaron's Thinking Putty from your walls. As a final note, always exercise caution when using sharp objects near your walls, and remember, prevention is better than cure. Keep your putty play within designated areas to avoid future wall-cleaning escapades.